Products
High Temperature Heat Pump
TI's Ultra High Temperature Heat Pump is a DC inverter, two-stage compression system engineered to deliver water outlet temperatures up to 85°C. It uses a cascade refrigerant circuit — R32/R410A on the first stage and R134A/R515B on the second — to achieve the thermal lift that single-stage systems cannot reach while maintaining...
Air to Water Heat Pump
An air to water heat pump uses a vapour-compression refrigeration cycle to extract latent heat from outdoor air — even at sub-zero temperatures — and delivers it as hot water into a building's heating and domestic hot water circuits. Unlike gas boilers, which burn fuel to generate heat, heat pumps move existing thermal energy. This fundamental difference...
Water to Water Heat Pump
A water to water heat pump operates on the same refrigeration cycle as other heat pump types, but uses a liquid as both its heat source (the evaporator side) and heat sink (the condenser side). The source water may come from a ground loop, a surface water body, a cooling tower circuit, or — in more complex building systems — from a recirculating...
Battery Energy Storage
A BESS stores electricity in lithium-iron-phosphate (LFP) batteries and discharges it on demand. Our preferred solution is a fully integrated, liquid-cooled AC block — battery, cooling and power-conversion built into one 20-ft container — that installs faster and costs less than assembling separate parts. Blocks stack from a few MWh to hundreds of MWh, pair naturally with solar PV and...
High Temperature Heat Pump
A commercial charging system combines AC destination chargers — where vehicles dwell for hours — with DC fast chargers for rapid top-ups, tied together by a smart back-office that balances load across the site. Our preferred equipment pairs a dual-socket AC charger (2 × 22 kW) with a modular DC fast charger (up to 200 kW). Both speak open OCPP...
